↑ seznam projektů

REBAT - development of a pilot plant for the extraction of metals of interest during the recycling of Li batteries and accumulators
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000344
Program/Výzva:	Application - call I
Anotace:	The subject of the project is the construction of a pilot plant for the extraction of metals of interest during the recycling of lithium Li batteries and accumulators. The project output will be a pilot plant. The applicant is a small mid-cap (small enterprise with medium market capitalization) and a mid-cap partner. Kovohutě Příbram nástupnická, a.s., the applicant for support, is a traditional and reliable supplier of products and alloys based on lead, tin and precious metals.
Partneři:	Kovohutě Příbram nástupnická, a.s. University of Chemical Technology in Prague
Období realizace:	31.12.2024
Stav:	in preparation
Řešitel za VŠCHT:	Vu Nguyen Hong, Ing., Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000344 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

The influence of coagulation conditions on suspension formation and membrane separation efficiency
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000556
Program/Výzva:	Application – call I
Anotace:	The aim of the project is a comprehensive improvement of water treatment technology. The project involves the use of modern ceramic membrane modules and advanced field instrumentation to achieve autonomous operation of the device in conditions of changing input water quality. The key feature is not only the improvement of water treatment efficiency, but also the improvement of its specificity and especially energy efficiency, including the reduction of the process carbon footprint. The final product should be a fully autonomous unit for the production of drinking water.
Partneři:	ENVI-PUR, s.r.o. University of Chemical Technology in Prague
Období realizace:	31.12.2025
Stav:	in preparation
Řešitel za VŠCHT:	Lucie Pokorná

PROJEKT CZ.01.01.01/01/22_002/0000556 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Global Jet
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000987
Program/Výzva:	Application – Call I
Anotace:	Verification of a unique concept of a light composite aircraft with reactive propulsion. The aircraft design will use innovative hybrid and ceramic materials with high thermal and chemical resistance, including integrated fuel tanks for ecological synthetic fuel. The project will be implemented in cooperation with the Civil Aviation Authority of the Czech Republic. The project output will enable the creation of a completely new, unique category of light aircraft with an expected significant commercial potential.
Partneři:	DISTAR CZ a.s. Technical University of Liberec Czech Technical University in Prague New Space Technologies s.r.o. VÚTS, a.s. University of Chemical Technology in Prague
Období realizace:	31.12.2026
Stav:	in preparation
Řešitel za VŠCHT:	Antoš Petr, Dr. Ing., Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000987 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Smart thermostatic system with photocatalytic air purification for low-energy buildings
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000799
Program/Výzva:	Application – call I
Anotace:	The aim of the project is to achieve the highest possible energy savings in heating and cooling of indoor residential spaces using a new generation of thermal recovery with the benefit of a ground heat exchanger and with the dual function of air purification using filter-free, and therefore without the need for additional operating costs, photocatalysis technology. The outputs will be 2 R&D results: 1) Functional sample of a system for controlling and managing temperature and air purity 2) Utility model of a system for controlling and managing temperature and air purity
Partneři:	Retap, spol. s r.o. University of Chemical Technology in Prague
Období realizace:	30.06.2026
Stav:	in preparation
Řešitel za VŠCHT:	Hazafy David, Mgr. Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000799 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Use of composites with polymer matrix to extend the service life of containers for animal by-products (VŽP)
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000861
Program/Výzva:	Application – call I
Anotace:	The subject of the project is the application of polymer composites, mainly based on polyethylene and polypropylene, with inorganic filler for the rendering industry in the form of transport and storage containers/containers. These polymer composites will exhibit significantly increased impact strength, higher temperature resistance and reduced thermal expansion. The output of the project will be a composite container (container) in a combination of steel structure and composite.
Partneři:	UNO PRAHA, spol. s r. o. University of Chemical Technology in Prague
Období realizace:	31.05.2026
Stav:	in preparation
Řešitel za VŠCHT:	Sefl Václav, Ing. Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000861 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development of inorganic hardeners for foundry self-hardening mixtures with inorganic binder
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000455
Program/Výzva:	Application – Call I
Anotace:	The project is focused on improving the environment with the aim of developing an inorganic hardener for foundry self-hardening mixtures with inorganic binder. This will ensure the creation of a completely inorganic binder system and thus improve the working environment in the foundry, significantly reduce emissions, improve the properties of waste materials and have an overall positive impact on improving the environment. The project output will be a functional sample of an inorganic hardener for self-curing technology.
Partneři:	SAND TEAM, spol. s r.o. University of Chemical Technology in Prague
Období realizace:	1.6.2023-30.06.2026
Stav:	Implementation
Celkové náklady:	25 661 018 CZK
Dotace:	17 999 278 CZK
Celkové náklady-VŠCHT:	5 600 000 CZK
Dotace-VŠCHT:	4 760 000 CZK
Řešitel za VŠCHT:	Antoš Petr, Dr. Ing., Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000455 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGIES AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Influence of catalyst properties on hydrogenation conversions of oxygenates obtained from sugars
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GC - International Projects (2007 - 2050)
Program:	GAČR
Registrační číslo projektu:	21-45648L
Program/Výzva:	GF21
Anotace:	Selective transformation of so-called platform chemicals, which include 5-hydroxymethylfurfural (HMF) and levulinic acid (LA), can provide chemicals with high added value in future biorefineries and thus increase the sustainability of the chemical industry. However, the procedures and catalysts published so far show too low selectivity to interesting target products. In order to fully control the conversions to the desired products, it is necessary not only to describe the individual steps of the reaction transformations, but also to understand the role of individual functionalities of heterogeneous catalysts on the course of the reactions. It is also necessary to combine the relevant functionalities into the design of multifunctional catalysts that will ensure the selective conversion of starting materials to the desired products. The project will therefore focus on the design of advanced heterogeneous catalysts and to understand the key factors for achieving high selectivity in the transformation of HMF and LA, which is highly interesting from the point of view of understanding the fundamental aspects of biomass transformations.
Partneři:	University of Chemical Technology in Prague
Období realizace:	1. 10. 2021 - 30. 9. 2024
Stav:	Implementation
Celkové náklady:	6 909 000 CZK
Dotace:	6 409 000 CZK
Celkové náklady-VŠCHT:	6 909 000 CZK
Dotace-VŠCHT:	6 409 000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA
Zakázka:	570-13-1967

Project 21-45648L is implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

Study of key factors influencing hydrogenation/deoxygenation of mixtures of oxygenates
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GA - Standard Projects (1993 - 2050)
Program:	GAČR
Registrační číslo projektu:	22-12925S
Program/Výzva:	GA22
Anotace:	The project deals with the study of hydrogenation/deoxygenation of model furanic and phenolic substances in the gas phase on heterogeneous supported metal catalysts. Attention is focused on the description of key parameters influencing hydrogenation/deoxygenation of mixtures of oxygenates, and the clarification of the origin of the different activity of catalysts in the hydrogenation/deoxygenation of oxygenates alone or their mixtures. Not only the activity and selectivity of the catalysts will be studied, but also the influence of their composition and properties (e.g. hydrogenation power and oxophilicity) on the activity/selectivity of the catalysts and on the adsorption/desorption of oxygenates (individually and in mixtures) on these catalysts. The project will contribute to a better understanding of the hydrogenation/deoxygenation of mixtures of furanic and phenolic compounds, which is important for the future valorization of oxygenates obtained from biomass.
Partneři:	University of Chemical Technology in Prague University of Mining and Technology - Technical University of Ostrava, Institute of Environmental Technologies
Období realizace:	1. 1. 2022 - 31. 12. 2024
Stav:	Implementation
Celkové náklady:	9,274,000 CZK
Dotace:	8,941,000 CZK
Celkové náklady-VŠCHT:	5,725,000 CZK
Dotace-VŠCHT:	5,392,000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA
Zakázka:	570-13-2987

Project 22-12925S is implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

The influence of precipitates on hydrogen transport and hydrogen-induced embrittlement of aluminum alloys
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GA - Standard Projects (1993 - 2050)
Program:	GAČR
Registrační číslo projektu:	23-06169S
Program/Výzva:	GA23
Anotace:	Absorption of atomic hydrogen into the structure of aluminum alloys can lead to a significant deterioration of their mechanical properties, especially ductility. The interaction between precipitates in the aluminum matrix and hydrogen affects the availability of hydrogen, since hydrogen bound in irreversible traps cannot diffuse to critically stressed areas and contribute to crack propagation. Hydrogen bonding at or near the interface of precipitates and matrix is influenced by the composition and phase structure of the precipitates and their size, distribution, morphology and type of interface, and these properties are controlled mainly by heat treatment. The main objective of the project is to understand and quantify the influence of precipitates on the diffusion and capture of hydrogen and the mechanism of hydrogen embrittlement in aluminum alloys. The localization of captured hydrogen and its permeation will be monitored using a number of advanced in situ techniques on variously heat-treated model alloys with specific interfaces between precipitates and matrix.
Partneři:	University of Chemical Technology in Prague Charles University, Faculty of Mathematics and Physics, Faculty of Low Temperature Physics
Období realizace:	1. 1. 2023 - 31. 12. 2025
Stav:	Implementation
Celkové náklady:	10,186,000 CZK
Dotace:	9,234,000 CZK
Celkové náklady-VŠCHT:	7,632,000 CZK
Dotace-VŠCHT:	6,680,000 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.

Project 23-06169S is implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

Antibacterial Barrier in Human Joint Replacements
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000934
Program/Výzva:	Application – Call I
Anotace:	The project addresses the minimization of the risk of occurrence and possible rapid elimination of bacterial infection in large joint replacements. Both during the implantation of the joint replacement, and in the most risky time horizon after the operation of 1-5 weeks, as well as long-term protection for the lifetime of the replacement. The project has a total of 7 outputs - 4 Functional samples (functional layer, implant with layer, implant with TiO2, Implant with TiO2 and dispersion layer), 2 Verified Technologies (Depot layer, TiO2 layer) and 1 Submitted patent application.
Partneři:	ProSpon, spol. s.r.o. University of Chemical Technology in Prague ENDOIMPLANT, spol. s r.o.
Období realizace:	1. 6. 2023 - 31. 12. 2026
Stav:	Implementation
Celkové náklady:	15 207 250 CZK
Řešitel za VŠCHT:	Vojtěch Dalibor, prof. Dr. Ing.

PROJECT CZ.01.01.01/01/22_002/0000934 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development of technology for replacing fossil methane by biological conversion of carbon dioxide to methane using renewable energy sources
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000864
Program/Výzva:	Application – call I
Anotace:	The project focuses on research and development of innovative techniques in the field of biomethanization. The aim of the project is research and development of a pressure biomethanization reactor under optimal pressure conditions to maximize the efficiency of CO2 conversion to biomethane, including research and development of the related technical solution of a specific microbial consortium for biomethanization under elevated pressure. The project output will be: 1x Pilot plant, 1x Utility model, 1x Functional sample.
Partneři:	EPS biotechnology, s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 1. 2024 - 31. 12. 2026
Stav:	Implementation
Celkové náklady:	23 992 456 CZK
Dotace:	14 455 654 CZK
Celkové náklady-VŠCHT:	2 400 000 CZK
Dotace-VŠCHT:	2 040 000 CZK
Řešitel za VŠCHT:	Pokorná Dana, doc. Ing., CSc.

PROJECT CZ.01.01.01/01/22_002/0000864 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Research, development and verification of a new technology for the production of anti-corrosion coatings from secondary raw materials
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000369
Program/Výzva:	Application – call I
Anotace:	The ZincTechPaint project is focused on research, development and verification of a new technology for the industrial production of innovative zinc-filled anti-corrosion coatings, developed from unique recycled secondary raw materials of zinc powders resulting from the material utilization of zinc waste, in accordance with the principles of the circular economy, the Industry 4.0 initiative and societal challenges in the field of climate. The output will be a semi-operational pilot line and a functional sample of a circular anti-corrosion coating.
Partneři:	COREZINC s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 3. 2023 - 31. 12. 2025
Stav:	Implementation
Celkové náklady:	53 991 097 CZK
Dotace:	36 775 043 CZK
Celkové náklady-VŠCHT:	6 004 837 CZK
Dotace-VŠCHT:	5 104 111 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.

PROJEKT CZ.01.01.01/01/22_002/0000369 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAMME TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

GRENA, a.s. - Application 1 - Chemically bonded, hydrophobic vermiculite board
Poskytovatel:	MIT
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000334
Program/Výzva:	Application – call I
Anotace:	The project builds on the applicant's previous research and development activities in the field of production of boards using vermiculite. Vermiculite is a universal mineral, characterized by purity, absence of odor and resistance to mold. After exfoliation, it is resistant even at high temperatures. It is popular as an insulator for fireplace inserts or stoves. However, problems arise when using it in the form of the need for proper use and greater absorbency of the material. The project will produce 2 prototypes.
Partneři:	GRENA a.s. University of Chemical Technology in Prague
Období realizace:	31.12.2025
Stav:	Implementation
Celkové náklady:	29,134,940 CZK
Dotace:	18,063,703 CZK
Celkové náklady-VŠCHT:	5,999 999 CZK
Dotace-VŠCHT:	5,099,999 CZK
Řešitel za VŠCHT:	Urbánek Jan, Ing. Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000334 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAM TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development of technology for optimizing the surface condition of special high-alloy materials
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000407
Program/Výzva:	Application – call I
Anotace:	The aim of the submitted project is research and development of a new proven technology for pickling special high-alloy materials. The project is submitted within the framework of a consortium with the University of Chemical Technology in Prague. The project output will be five verified technologies - four optimized pickling technologies for special high-alloy materials and one methodology for evaluating the resistance of high-alloy materials after pickling.
Partneři:	FK system - surface treatments, s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 5. 2023 - 31. 5. 2026
Stav:	Implementation
Celkové náklady:	23,969,631 CZK
Dotace:	17,121,442 CZK
Celkové náklady-VŠCHT:	6,849,922 CZK
Dotace-VŠCHT:	5,822,434 CZK
Řešitel za VŠCHT:	Head Václav, Ing. Ph.D.

PROJECT CZ.01.01.01/01/22_002/0000407 IS CO-FINANCED BY THE EUROPEAN UNION WITHIN THE FRAMEWORK OF THE OPERATIONAL PROGRAM TECHNOLOGY AND APPLICATIONS FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Comprehensive solution for extending the service life of molds for high-pressure casting of sanitary ceramics
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Technology and Applications for Competitiveness
Program:	OP TAK
Registrační číslo projektu:	CZ.01.01.01/01/22_002/0000766
Program/Výzva:	Application – call I
Anotace:	The newly submitted project will involve research and development of a mold for high-pressure casting of sanitary ceramics with an extended service life. The newly developed solution will extend the life of the washbasin mold from the original approx. 15 thousand cycles/mold to the new approx. 35 thousand cycles/mold. For toilet molds, it will be from the original approx. 10 thousand cycles/mold to approx. 30 thousand cycles/mold. For both types of molds, this is a more than 100% extension of life. The output of the project will be 1x verified technology and 2x utility model.
Partneři:	Dřevojas, výrobní družstvo VÚTS, a.s. Vysoká škola chemicko-technologická v Praze
Období realizace:	1. 6. 2023 - 31. 12. 2026
Stav:	Implementation
Celkové náklady:	23 409 816 CZK
Dotace:	16 342 473 CZK
Celkové náklady-VŠCHT:	6 575 080 CZK
Dotace-VŠCHT:	5 588 818 CZK
Řešitel za VŠCHT:	Pokorný Jiří, Dr. Ing.

PROJEKT CZ.01.01.01/01/22_002/0000766 JE POLUFINANCOVÁN BY THE EUROPEAN UNION V RAMCI OPERÁČNÍHO PROGRAMU TECHNOLOGIE APLIKACE PRO KURENCESCHOPNOST POD ZÁSTITOU MINISTERSTVA PRŮMYSLU A CHODU ČR.

↑ seznam projektů

Hydrogen embrittlement resistant new steel links solutions for off-shore wind turbines
Poskytovatel:	EC
Poskytovatel, plný název:	European Commission
Program:	RFSC
Registrační číslo projektu:	101057239
Program/Výzva:	RFCS
Anotace:	To increase efficiency and lower production costs, the offshore wind industry is focusing on the development of larger wind generators. The HELIX project aims to provide high-strength steel fasteners for the offshore wind industry at a lower cost, more resistant to corrosion and with a wider diameter to support the ever-increasing size of wind turbines, leading to higher productivity and supporting the development of larger foundations to support above 10MW OWT and allow an easy assembly and disassembly of the whole structure. During the project, novel high-strength steel grades and protecting zinc-flake based coatings will be developed and validated. In addition, HELIX will use advanced characterization and traditional techniques under both atmospheric and immersion conditions to advance in the knowledge of hydrogen absorption in high-strength steels under cathodic protection and in atmospheric conditions
Partneři:	CHEMICAL AND TECHNOLOGICAL DEPARTMENT IN PRAGUE, Czechia
Období realizace:	1. 7. 2022 - 30. 6. 2025
Stav:	Implementation
Akronym:	HELIX
Celkové náklady:	EUR 1,881,420
Dotace:	EUR 1,128,848
Celkové náklady-VŠCHT:	EUR 330,332
Dotace-VŠCHT:	EUR 198,198
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.
Zakázka:	570-45-2012

This project has received funding from the European Union's Research Fund for Coal and Steel program under grant agreement No. 101057239.

↑ seznam projektů

Modelling of hydrogen activity from atmospheric corrosion in ultra-high strength steels for light structure application
Poskytovatel:	EK
Poskytovatel, plný název:	European Commission
Program:	RFSC
Registrační číslo projektu:	101034041
Program/Výzva:	RFCS
Anotace:	Environmental assisted fracture of ultra-high strength steels under aggressive environment is a complex phenomenon that combines the complexity of both atmospheric corrosion and hydrogen embrittlement processes. The aim of this project is to develop a methodology based on advanced numerical models to predict and minimize such risks. Sets of new experimental data will be obtained at both local and global scales to link atmospheric corrosion mechanisms and hydrogen entry and diffusion into the steels. The different models will be coupled taking into account mechanical parameters to assess risks of brittle fracture based on local hydrogen concentration.
Partneři:	RISE KIMAB AB, Sweden ASSOCIACAO DO INSTITUTO SUPERIOR TECNICO PARA A INVESTIGACAO EDESENVOLVIMENTO, Portugal VYSOKA SKOLA CHEMICKO-TECHNOLOGICKA IN PRAGUE, Czech Republic ARCELORMITTAL MAIZIERES RESEARCH SA, France VOESTALPINE STAHL GMBH, Austria
Období realizace:	1. 7. 2021 - 30. 6. 2024
Stav:	Implementation
Akronym:	AtHyCor
Celkové náklady:	1 906 026 EUR
Dotace:	1 143 615 EUR
Celkové náklady-VŠCHT:	346 690 EUR
Dotace-VŠCHT:	208 014 EUR
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.

This project has received funding from the European Union’s Research Fund for Coal and Steel programme under grant agreement No. 101034041.

↑ seznam projektů

Determination of the Limit Concentration of Hydrogen in a Mixture with Natural Gas for the Safe Use of Underground Gas Storage Technologies
Poskytovatel:	TAČR
Poskytovatel, plný název:	Technology Agency of the Czech Republic
Program, plný název:	Program for the Support of Applied Research, Experimental Development and Innovation THÉTA
Program:	THÉTA
Registrační číslo projektu:	TK05020150
Program/Výzva:	THÉTA 5
Anotace:	A point evaluation system will be developed to determine the limit amount of hydrogen in a mixture with natural gas for the safe use of underground gas storage technologies. By replacing or modifying the identified critical parts, it will subsequently be possible to adapt the technology to the required hydrogen concentration. To achieve this goal, it is necessary to: (1) Determine the equilibrium amount of atomic hydrogen in commonly used steel grades after long-term exposure. (2) Determine the influence of metallurgical defects, welds, surface condition, contamination and mechanical loading on the susceptibility to hydrogen cracking. (3) Design and verify procedures for protecting steel against hydrogen embrittlement. (4) Verify the results of laboratory studies by long-term tests of critical combinations of material/material condition/environment/loading.
Partneři:	University of Chemical Technology in Prague RWE Gas Storage CZ, s.r.o. Institute of Theoretical and Applied Mechanics of the Academy of Sciences of the Czech Republic, v. v. i. SVÚM a.s.
Období realizace:	1. 2. 2023 - 31. 12. 2025
Stav:	Implementation
Celkové náklady:	22,381,592 CZK
Dotace:	13,419,000 CZK
Celkové náklady-VŠCHT:	6,184,000 CZK
Dotace-VŠCHT:	6,184,000 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.
Zakázka:	570-23-2339

Project TK05020150 is implemented with financial support from the Technology Agency of the Czech Republic within the framework of the THÉTA program

↑ seznam projektů

Highly advanced catalyst for the transformation of methanol into hydrocarbons for reliable production of e-gasoline
Poskytovatel:	TAČR
Poskytovatel, plný název:	Technology Agency of the Czech Republic
Program:	TREND
Registrační číslo projektu:	FW10010328
Program/Výzva:	TREND 10
Anotace:	The aim of the project is to develop the structure and production technology of a new generation of high-performance catalyst for the process of transforming methanol into modern and sustainable fuels. Specifically, the aim of the project is to develop nanostructured hierarchical zeolite catalysts for the selective transformation of methanol into a C4-C10 hydrocarbon fraction with a high content of branched alkanes and cycloalkanes with a high octane number. The catalysts will be characterized by high stability of catalytic activity, easy regenerability and structural stability, and will enable economically favorable transformation of methanol to C4-C10 with high atomic selectivity. The goal is to develop an economic process for the production of catalysts that, with their main functional properties, will surpass catalysts on the world market.
Partneři:	RANIDO, s.r.o. Institute of Physical Chemistry J. Heyrovský AV ČR, v. v. i. University of Chemical Technology in Prague
Období realizace:	1. 1. 2024 - 30. 6. 2026
Stav:	Implementation
Celkové náklady:	18 222 519 CZK
Dotace:	12 725 900 CZK
Celkové náklady-VŠCHT:	5 150 000 CZK
Dotace-VŠCHT:	4 635 000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA

Project FW10010328 is financed with state support from the Technology Agency of the Czech Republic and the Ministry of Industry and Trade within the TREND Program

↑ seznam projektů

Research and development of butter processing equipment REWORKER
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/19_262/0020180
Program/Výzva:	APPLICATION VII. Call - with effective cooperation
Anotace:	The project is focused on research and development of butter processing equipment. The equipment will be able to perform rapid treatment of frozen butter from 25 kg blocks for further use. The output of the project will be a prototype of a technological butter processing equipment that has functionalities with the principles of Industry 4.0. and which will be able to be used for the processing of butter from state material reserves or in conditions where it is necessary to store butter in a highly frozen state.
Partneři:	B e H o spol. s r. o. University of Chemical Technology in Prague
Období realizace:	1. 3. 2020 - 31. 12. 2022
Stav:	Project completed by the applicant
Akronym:	REWORKER
Celkové náklady:	20,704,210 CZK
Dotace:	12,306,582 CZK
Celkové náklady-VŠCHT:	2,191,348 CZK
Dotace-VŠCHT:	1,643,511 CZK
Řešitel za VŠCHT:	Filip Vladimír, prof. Ing., CSc.

PROJECT CZ.01.1.02/0.0/0.0/19_262/0020180 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development of a method for producing a primary mold for the production of molds for pressure casting of ceramics
Poskytovatel:	TAČR
Poskytovatel, plný název:	Technological Agency of the Czech Republic
Program, plný název:	Programme to Support Applied Research and Experimental Development EPSILON
Program:	EPSILON
Registrační číslo projektu:	TH04020462
Program/Výzva:	Program for the support of applied research and experimental development EPSILON (2015 - 2026)
Anotace:	The subject of the project is R&D of a method for producing a primary mold /device/ into which molds used for pressure casting of ceramics will be cast. Within the project, we want to develop two independent methods – A) to develop a material from which the mold will be produced by milling, B) to develop a procedure for applying 3D printing in the production of primary moldsčís forms. The project will create three outputs – a utility model of a new material and two verified technologies (mold production technology, 3D printing technology). The outputs will be achieved no later than the end of the project implementation. A detailed DESCRIPTION OF THE PROJECT SOLUTION, including research goals and purpose of the project, is a separate annex to the application.
Partneři:	Dřevojas, production cooperative University of Chemical Technology in Prague
Období realizace:	1. 1. 2019 - 31. 12. 2020
Stav:	Project completed
Celkové náklady:	22,519,000 CZK
Dotace:	13,511,000 CZK
Celkové náklady-VŠCHT:	5,823,000 CZK
Dotace-VŠCHT:	Pokorný Jiří, Dr. Ing.
Řešitel za VŠCHT:	Project TH04020462 was implemented with the financial support of the Technology Agency of the Czech Republic within the EPSILON program

↑ seznam projektů

Quantification of basicity of reconstructed double layer hydroxides and its relationship with catalytic behavior in base-catalyzed reactions
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GA - Standard Projects (1993 - 2050)
Program:	GAČR
Registrační číslo projektu:	19-22978S
Program/Výzva:	GA19
Anotace:	The main goal of the project is to provide a basic understanding of the relationship between structural / textural / acid-base properties and catalytic properties (activity / stability) of reconstructed double layer hydroxides LDH (in bulk and supported form). Our goal is to clarify which basic centers have excellent activity / stability in the aldol condensation of furfural and how to maximize their number. To achieve this ambitious goal, we set the following specific objectives: (i) to describe the changes in structural/acid-base properties during the transformation of a mixed oxide into a reconstructed LDH, using appropriate in-situ techniques, (ii) to determine the influence of the support on the structural/acid-base properties of the reconstructed LDHs supported on the support, (iii) to clarify the relationship between the structural/acid-base properties of the (supported) reconstructed LDHs and their catalytic behavior (especially activity and long-term stability).
Partneři:	University of Chemical Technology in Prague University of Pardubice
Období realizace:	1. 1. 2019 - 31. 12. 2021
Stav:	Project completed
Celkové náklady:	8 895 000 CZK
Dotace:	8 514 000 CZK
Celkové náklady-VŠCHT:	5 197 000 CZK
Dotace-VŠCHT:	4,816,000 CZK
Řešitel za VŠCHT:	Kikhtyanin Oleg, Ing., Ph.D.
Zakázka:	570-13-9906

Project 19-22978S was implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

Supported copper-based hydrogenolysis catalysts
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GA - Standard Projects (1993 - 2050)
Program:	GAČR
Registrační číslo projektu:	GA20-28093S
Program/Výzva:	GA20
Anotace:	The main goal of the project is to contribute to the fundamental understanding of the relationship between the activity of Cu hydrogenolysis catalysts and their structure. The project will therefore focus on the controlled synthesis of supported Cu catalysts on a number of clearly defined supports in order to prepare hydrogenolysis catalysts with different structural and physicochemical properties. In particular, catalysts with different sizes of Cu clusters will be synthesized, which will have improved long-term stability (i.e. resistance to sintering). The activity, selectivity and long-term stability of the catalytic activity of the synthesized catalysts will be studied in the hydrogenolysis of esters and the results will subsequently be correlated with the structural and physicochemical properties of the catalysts in order to obtain information about the relationship between structure and activity that can be used for the rational design of hydrogenolysis catalysts.
Partneři:	University of Chemical Technology in Prague
Období realizace:	1. 1. 2010 - 31. 12. 2022
Stav:	Project completed
Celkové náklady:	6 900 000 CZK
Dotace:	6 435 000 CZK
Celkové náklady-VŠCHT:	6 900 000 CZK
Dotace-VŠCHT:	6 435 000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA
Zakázka:	570-13-0936

Project GA20-28093S was implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

Simultaneous deoxygenation of acids and phenols in pyrolysis oils from activated sludge
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GC - International Projects (2007 - 2050)
Program:	GAČR
Registrační číslo projektu:	GC20-28086J
Program/Výzva:	GC20
Anotace:	The project is focused on elucidating mutual inhibitory effects during the joint deoxygenation of mixtures consisting of different types of oxygenates (fatty acids and phenols). The project deals with the design and study of suitable bifunctional catalysts with the aim of describing the relationships between the conditions of catalyst synthesis and their resulting properties. The efficiency of the catalysts will be studied in the deoxygenation of mixtures of fatty acids and phenols with the aim of understanding the mutual interaction of various oxygenates during deoxygenation. This information will help improve the design of catalysts. In addition, the inhibitory effects of nitrogen compounds will also be studied. These findings may contribute to progress in the deoxygenation of complex raw materials such as pyrolysis oils from activated water sludge.
Partneři:	University of Chemical Technology in Prague
Období realizace:	1. 1. 2010 - 31. 12. 2022
Stav:	Project completed
Celkové náklady:	7 023 000 CZK
Dotace:	6 867 000 CZK
Celkové náklady-VŠCHT:	7 023 000 CZK
Dotace-VŠCHT:	6,867,000 CZK
Řešitel za VŠCHT:	Kikhtyanin Oleg, Ing., Ph.D.
Zakázka:	570-13-0940

Project GC20-28086J was implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

Study and optimization of promoted CuZnAl hydrogenation catalysts
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GA - Standard Projects (1993 - 2050)
Program:	GAČR
Registrační číslo projektu:	17-05704S
Program/Výzva:	GA17
Anotace:	The project deals with the study of promoted CuZnAl hydrogenation catalysts. Hydrogenation catalysts based on CuZn are promising catalysts for the hydrogenation of chemical specialties, e.g. esters. CuZnAl catalysts will be synthesized in a controlled mannertized using co-precipitation, deposition and impregnation methods. The catalysts will be described in detail by physicochemical characterization techniques, which will allow rationalizing the relationship between the synthesis parameters and the resulting structure and properties of the catalysts. The hydrogenation activity of the prepared CuZnAl catalysts will be studied in two model hydrogenations of esters (dimethyl adipate and methyl hexanoate) to the corresponding alcohols. This will allow describing the relationship between the structure and properties of the catalysts and their catalytic activity and selectivity. Furthermore, the stability of the prepared catalysts will also be studied.
Partneři:	University of Chemical Technology in Prague
Období realizace:	1. 1. 2017 - 31. 12. 2019
Stav:	Project completed
Celkové náklady:	6 650 000 CZK
Dotace:	6 401 000 CZK
Celkové náklady-VŠCHT:	6 650 000 CZK
Dotace-VŠCHT:	6 401 000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA
Zakázka:	570-13-7846

Project 17-05704S was implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

The influence of microstructure on hydrogen-induced corrosion damage of high-strength steels
Poskytovatel:	GAČR
Poskytovatel, plný název:	Grant Agency of the Czech Republic
Program, plný název:	GA - Standard Projects (1993 - 2050)
Program:	GAČR
Registrační číslo projektu:	17-22586S
Program/Výzva:	GA17
Anotace:	High-strength steels (HSS) represent a group of advanced materials with tensile strengths higher than 600 MPa. Their application is growing rapidly, mainly due to the interest of the automotive industry due to the potential of HSS to significantly contribute to reducing the weight and consumption of new cars. The decisive limitation for further application of HSS is the problems associated with the entry of atomic hydrogen into their structure, leading to hydrogen embrittlement (hydrogen-induced corrosion cracking) and other forms of damage. Hydrogen embrittlement depends on three factors: (1) the formation of atomic hydrogen and its entry into the crystal lattice, (2) hydrogen transport processes, and (3) the mechanism of hydrogen embrittlement. This project will study the influence of the complex microstructure of VPO and metal coatings on these factors using a number of innovative experimental procedures such as SKPFM with the aim of gaining deeper insight into the mechanism of atomic hydrogen formation during corrosion processes, hydrogen entry into the metal structure, hydrogen permeability and capture, the mechanism of hydrogen embrittlement and hydrogen recombination and release.
Partneři:	University of Chemical Technology in Prague
Stav:	Project completed
Celkové náklady:	6 900 000 CZK
Dotace:	6 783 000 CZK
Celkové náklady-VŠCHT:	6 900 000 CZK
Dotace-VŠCHT:	6 783 000 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.
Zakázka:	570-13-7847

Project 17-22586S was implemented with the financial support of the Grant Agency of the Czech Republic

↑ seznam projektů

Reliable Bio-based Refinery Intermediates
Poskytovatel:	EC
Poskytovatel, plný název:	European Commission
Program:	HORIZONT 2020
Registrační číslo projektu:	727463
Program/Výzva:	H2020
Anotace:	The BioMates project aims to combine innovative 2nd generation biomass processing technologies with the aim of achieving cost-effective production of intermediates that can be used as available renewable feedstocks in existing oil refineries simultaneously with conventional feedstocks. The resulting BioMates concept will enable 1) a reduction in production costs by reducing fossil energy requirements, 2) a minimization of investment costs by utilizing available refinery capacity, and 3) an increase in the content of biocomponents in motor fuels.
Partneři:	ETHNIKO KENTRO EREVNAS KAI TECHNOLOGIKIS ANAPTYXIS( CERTH FRAUNHOFER-GESELLSCHAFT ZUR FÖRAUNHOFER-GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FÖRSCHUNG VYSOKA SKOLA CHEMICKO-TECHNOLOGICKA V PRAGUE, IMPERIAL COLLEGE OF SCIENCE, TECHNOLOGY AND MEDICINE, INSTITUTE FOR ENERGY AND ENVIRONMENTAL RESEARCH, HYET HYDROGEN B.V, RANIDO, BP Europa SERISE ENERGY TECHNOLOGY CENTER AB
Období realizace:	10/2016 - 3/2022
Stav:	Project completed
Akronym:	BIOMATES
Celkové náklady:	5 923 316 EUR
Dotace:	5 923 316 EUR
Celkové náklady-VŠCHT:	656 672 EUR
Dotace-VŠCHT:	656 672 EUR
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA
Zakázka:	570-42-6792

This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 727463.

↑ seznam projektů

Joint research and development of innovative catalytic processing and technology for the efficient conversion of vegetable oils into clean fuels
Poskytovatel:	MŠMT
Poskytovatel, plný název:	Ministry of Education, Youth and Sports
Program, plný název:	LT - INTER-EXCELLENCE (2016 - 2024)
Program:	MŠMT
Registrační číslo projektu:	LTACH19017
Program/Výzva:	LTACH19
Anotace:	The main objective of the project is to develop a catalytic system in cooperation with a catalyst manufacturer (Ranido) and Chinese partners with complementary know-how, which will enable the conversion of triglycerides into advanced biofuels under more favorable reaction conditions than those applied in current technologies. Part of this objective is to develop a catalytic system so that it is flexible in terms of final products, i.e. to enable the production of fatty alcohols in addition to advanced biofuels. Achieving this goal is conditional on achieving the project's partial goals, which are the development of an effective hydrogenolysis catalyst that will ensure the selective conversion of triglycerides (vegetable oils) into a mixture of fatty alcohols, and the development of an isomerization catalyst that will transform mixtures of fatty alcohols into mixtures of isoalkanes. The first partial goal will be the main task of the research team in the Czech Republic, while ensuring the second partial goal will be the responsibility of the research team in the Czech Republic. By integrating both partial goals, it will be possible to achieve the main goal of the project, i.e. the development of a flexible catalytic system for the conversion of triglycerides.
Partneři:	University of Chemical Technologyická v Praze Ranido, s.r.o.
Období realizace:	1. 6. 2019 - 31. 12. 2021
Stav:	Project completed
Celkové náklady:	5 931 000 CZK
Dotace:	5 553 000 CZK
Celkové náklady-VŠCHT:	5 175 000 CZK
Dotace-VŠCHT:	5 175 000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA
Zakázka:	570-21-9203

Project LTACH19017 was financed with state support from the Ministry of Education, Youth and Sports of the Czech Republic within the INTER-EXCELLENCE program

↑ seznam projektů

Development of a new generation of RECLIME recycling unit for recycling calcium compounds (Ca++) used in the purification (cleaning) of raw sugar juices from sugar beet and sugar cane
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/17_176/0015758
Program/Výzva:	APPLICATION VI. Call - with effective cooperation
Anotace:	The subject of the submitted project is industrial research and experimental development of a recycling unit, which fundamentally changes the procedure for the purification of raw sugar juice using lime in the production of sugar from sugar beet. The technology is unique in the world, as it allows the recycling and reactivation of used calcium compounds and their effective use in the purification process. The project partners are the Faculty of Science, Palacký University in Olomouc and the University of Chemical Technology in Prague.
Partneři:	FUTURECYCLING Technology a.s. University of Chemical Technology in Prague Palacký University in Olomouc
Období realizace:	1. 2. 2019 - 31. 3. 2022
Stav:	Project completed
Akronym:	FUTURECYCLING
Celkové náklady:	36,084,706 CZK
Dotace:	24,108,192 CZK
Celkové náklady-VŠCHT:	3,617,442 CZK
Dotace-VŠCHT:	2,712,082 CZK
Řešitel za VŠCHT:	Šárka Evžen, doc. Ing., CSc., Pour Vladimír, Ing., CSc.

PROJECT CZ.01.1.02/0.0/0.0/17_176/0015758 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Research and development of new boards and 3D mouldings using expanded vermiculite
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/19_262/0020042
Program/Výzva:	APPLICATION VII. Challenge - with effective cooperation
Anotace:	The subject of the project is the research and development of new boards and 3D moldings, which will contain vermiculite and will exceed the current products offered with their technical properties. This will ensure that the company will be able to withstand even the main competitors in the world. A similar solution in this form does not yet exist and, thanks to the high prices of foreign competition, the applicant will have a great chance of succeeding with the new solution. The output of the project will be 5 prototypes (4 types of new boards + 3D moldings).
Partneři:	Grena, a.s. University of Chemical Technology in Prague
Období realizace:	1. 2. 2020 - 31. 12. 2022
Stav:	Project completed
Akronym:	Grena
Celkové náklady:	24,927,502 CZK
Dotace:	1,676,831 CZK
Celkové náklady-VŠCHT:	4,386,438 CZK
Dotace-VŠCHT:	3,728,472 CZK
Řešitel za VŠCHT:	Urbánek Jan, Ing. Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/19_262/0020042 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Application of recycled zinc in anti-corrosion coating systems
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/19_262/0020078
Program/Výzva:	APPLICATION VII. Call - with effective cooperation
Anotace:	The project Application of recycled zinc in anti-corrosion coating systems (hereinafter referred to as Zinccoatings) is focused on the research and development of innovative coatings using exclusively recycled zinc powders, in accordance with the principles of the circular economy.
Partneři:	COREZINC s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 4. 2020 - 31. 12. 2022
Stav:	Project completed
Akronym:	ZINCCOATINGS
Celkové náklady:	18,885,592 CZK
Dotace:	13,219,914 CZK
Celkové náklady-VŠCHT:	4,320,453 CZK
Dotace-VŠCHT:	3,672,385 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/19_262/0020078 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Comprehensive development of a biological agent for brewing
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/20_321/0024380
Program/Výzva:	APPLICATION VIII. Call - with effective cooperation
Anotace:	The project aims to prepare new yeast strains usable in brewing by means of selection or targeted techniques. These strains will have better properties for practical industrial use.
Partneři:	EPS biotechnology, s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 3. 2021 - 31. 5. 2023
Stav:	Project completed
Akronym:	MikroPivo
Celkové náklady:	8,796,178 CZK
Dotace:	6,151,167 CZK
Celkové náklady-VŠCHT:	2,000,000 CZK
Dotace-VŠCHT:	1,700,000 CZK
Řešitel za VŠCHT:	Dostálek Pavel, prof. Ing., CSc.

PROJECT CZ.01.1.02/0.0/0.0/20_321/0024380 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

3D SANDPRINT - New inorganic binder for additive technologies for the production of foundry cores
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/20_321/0023613
Program/Výzva:	APPLICATION VIII. Call - with effective co-operationthesis
Anotace:	The subject of the project is the research and development of an inorganic binder that will enable the production of cores using 3D printing technology in the field of foundry. The target parameter in terms of the strength of the core produced by 3D printing is the bending strength, which must be at least 3.5 MPa, thus not only the properties of the material but also its structure will be examined. The research will also be directed towards ensuring the long-term shelf life of cores with an inorganic binder. The project will be implemented in effective cooperation with a small business and a public organization.
Partneři:	SAND TEAM, spol. s r.o. F O C A M spol. s r.o. University of Chemical Technology in Prague
Období realizace:	17. 9. 2020 - 30. 5. 2023
Stav:	Project completed
Akronym:	3D SANDPRINT
Celkové náklady:	20,139,574 CZK
Dotace:	14,097,702 CZK
Celkové náklady-VŠCHT:	4,336,174 CZK
Dotace-VŠCHT:	3,685,784 CZK
Řešitel za VŠCHT:	Antoš Petr, Dr. Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/20_321/0023613 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Filled porous inorganic coatings for special purposes
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/20_321/0024502
Program/Výzva:	APPLICATION VIII. Challenge - with effective cooperation
Anotace:	Among the important parameters of products is their service life. This can be improved, in combination with the improvement of utility properties, by means of suitable surface treatments. One of the promising areas of such treatments is inorganic-based composite coatings. As part of the project, composite layered porous coatings will be manufactured and tested, which promise a combination of good thermal and corrosion resistance with improved sliding properties. The expected output is a verified technology for their production.
Partneři:	NACE Global s.r.o. University of Chemical Technology in Prague SVÚM a.s.
Období realizace:	1. 1. 2021 - 31. 3. 2023
Stav:	Project completed
Akronym:	NACE Global
Celkové náklady:	4,762,044 CZK
Dotace:	3,158,663 CZK
Celkové náklady-VŠCHT:	1,260,116 CZK
Dotace-VŠCHT:	787,573 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/20_321/0024502 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development and Retrofitting of Technopark Kralupy VŠCHT Prague V
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/20_330/0023447
Program/Výzva:	INFRASTRUCTURE SERVICES - VII. CALL - NON-PUBLIC SUPPORT - ACTIVITY C)
Anotace:	After three successful projects of retrofitting the Technopark, a final retrofitting project is prepared, focused primarily on modern unique instrumentation for the study of materials. The submitted project addresses the addition of 12 instruments and equipment with regard to the experience from operation and development needs of TPK. Place of implementation Technopark VŠCHT Kralupy nad Vltavou. Project focus: retrofitting with instrumentation for materials research. The instruments will be located in rooms with a total area of 493.3 m2.
Partneři:	University of Chemical Technology in Prague
Období realizace:	1. 12. 2020 - 31. 3. 2022
Stav:	Project completed
Celkové náklady:	17,730,000 CZK
Dotace:	13,297,500 CZK
Celkové náklady-VŠCHT:	17,730,000 CZK
Dotace-VŠCHT:	13,297,500 CZK
Řešitel za VŠCHT:	Petrák Milan, Ing.

PROJECT CZ.01.1.02/0.0/0.0/20_330/0023447 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Research and development of a new line of green cosmetics
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/21_374/0026822
Program/Výzva:	APPLICATION - CALL IX.
Anotace:	The main objective of the project is the development of a green line of Mira green cosmetic products, which will contain rinse-off and leave-on cosmetic formulations. A premix of active substances with a moisturizing and antioxidant effect will be used in the Mira green line of products.
Partneři:	EKOCHEM cosmetics, s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 2. 2022 - 30. 4. 2023
Stav:	Project completed
Akronym:	EKOCHEM
Celkové náklady:	3,922,776 CZK
Dotace:	2,541,735 CZK
Celkové náklady-VŠCHT:	400,000 CZK
Dotace-VŠCHT:	340,000 CZK
Řešitel za VŠCHT:	Hrádková Iveta, doc. Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/21_374/0026822 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

HERMIA - Development of modern technology for processing gastro-waste and BRO using Hermetia illucens fly larvae
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/21_374/0027351
Program/Výzva:	APPLICATION - CALL IX.
Anotace:	The project HERMIA - Development of modern technology for processing gastro-waste and BRO using Hermetia illucens fly larvae is focused on research and development of a new innovative method for the use of gastro-waste and other biodegradable waste in accordance with the principles of circular economy.
Partneři:	WASTen, z.s. University of Chemical Technology in Prague
Období realizace:	1. 3. 2022 - 31. 5. 2023
Stav:	Project completed
Akronym:	HERMIA
Celkové náklady:	9,523,166 CZK
Dotace:	6,666,216 CZK
Celkové náklady-VŠCHT:	3,044,877 CZK
Dotace-VŠCHT:	2 588 145 CZK
Řešitel za VŠCHT:	Vurm Radek, Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/21_374/0027351 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Floor-ceiling modules for air purification with photocatalytic and antimicrobial function
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/21_374/0026732
Program/Výzva:	APPLICATION - CALL IX.
Anotace:	The aim of the project is to develop a ceiling-mounted modular system for air purification in rooms. The module is based on foam ceramics provided with a functional coating with photocatalytic function, which can degrade harmful pollutants and microbial agents under UV illumination.
Partneři:	LANIK s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 1. 2022 - 31. 5. 2023
Stav:	Project completed
Akronym:	MODULLA
Celkové náklady:	4,021,502 CZK
Dotace:	2,815,051 CZK
Celkové náklady-VŠCHT:	1,712,722 CZK
Dotace-VŠCHT:	1,455,814 CZK
Řešitel za VŠCHT:	Baudys Michal, Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/21_374/0026732 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Use of thermoplastics to extend the service life of metal containers for industry
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/21_374/0027397
Program/Výzva:	APPLICATION - CALL IX.
Anotace:	The subject of the project is research and development of a method of combining two existing materials - metal and plastic - to create innovative containers - products for the transport and storage of bulk or liquid chemically aggressive substances. The main objective of the submitted project is research and development of innovative procedures and solutions in the field of combining two materials and predicting their behavior in operation.
Partneři:	UNO PRAHA, spol. s r. o. University of Chemical Technology in Prague
Období realizace:	1. 9. 2021 - 30. 4. 2022
Stav:	Project completed
Akronym:	CONTAINERS
Celkové náklady:	20,777,222 CZK
Dotace:	14,544,055 CZK
Celkové náklady-VŠCHT:	4,314,223 CZK
Dotace-VŠCHT:	3,667,090 CZK
Řešitel za VŠCHT:	Head Václav, Ing. Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/21_374/0027397 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

CZ.01.1.02/0.0/0.0/15_019/0004629
Poskytovatel:	Ministry of Industry and Trade of the Czech Republic
Poskytovatel, plný název:	Operational Programme Enterprise and Innovation for Competitiveness
Program, plný název:	OP PIK
Program:	Use of heat-resistant materials for advanced applications in transport vehicles
Registrační číslo projektu:	APPLICATION I. CALL - WITH EFFECTIVE COOPERATION
Program/Výzva:	The aim of the project is to obtain 2 utility models in the field of thermal protection of structural elements of transport equipment, 3 different prototypes of protective elements will be manufactured and tested. The project is focused on research and use of composite materials with high heat resistance in the transport industry, especially in the structures of transport aircraft of all categories. Based on the experience gained in these demanding applications, the suitability of using these materials in other types of vehicles will be assessed.
Anotace:	České lupkové závody, a.s.University of Chemical Technology in PragueDISTAR CZ a.s.*Vision Consulting Automotive s.r.o.
Partneři:	1. 1. 2016 - 31. 12. 2018
Období realizace:	Project completed
Stav:	OPPIK, MPO
Akronym:	10,493,319 CZK
Celkové náklady:	5,440,748 CZK
Dotace:	46,958,302 CZK
Celkové náklady-VŠCHT:	29,984,617 CZK
Dotace-VŠCHT:	Antoš Petr, Dr. Ing., Ph.D.
Řešitel za VŠCHT:	PROJECT CZ.01.1.02/0.0/0.0/15_019/0004629 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Application of nanofibers in food packaging
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/16_084/0009936
Program/Výzva:	APPLICATION III. Call - with effective cooperation
Anotace:	The submitted project is focused on research into the applicability of nanofiber structures in food packaging materials. The priority objective is the development of modified packaging materials for heat-treated meat products (sausages). Modification of packaging materials with a nanofibrous structure containing antimicrobial substances will allow to increase the storage temperature or extend the shelf life of products. The project will also test materials for applications in packaging for pastries, or fruit and vegetables.
Partneři:	Nano Medical s.r.o. Podkrkonošská uzenina s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 9. 2017 - 8. 4. 2020
Stav:	Project completed
Akronym:	Nano Medical_Packaging
Celkové náklady:	13,660,000 CZK
Dotace:	7,888,650 CZK
Celkové náklady-VŠCHT:	2,300,000 CZK
Dotace-VŠCHT:	1,725,000 CZK
Řešitel za VŠCHT:	Demnerová Kateřina, prof. Ing., CSc.

PROJECT CZ.01.1.02/0.0/0.0/16_084/0009936 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Research on a new technology of foundry moulds made of self-hardening mixtures will useusing a geopolymer binder system
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/16_084/0010119
Program/Výzva:	APPLICATION III. Call - with effective cooperation
Anotace:	The main objective of the project is research and development of a new technology of foundry molds from self-hardening mixtures using a geopolymer binder system. The project will be focused on acquiring the knowledge necessary for the development of innovative technology through the implementation of industrial research and experimental development. The results obtained will lead to the introduction of a new technology of foundry molds, which have the potential for application on world markets. The project will be implemented with effective cooperation.
Partneři:	SAND TEAM, spol. s r.o. F O C A M spol. s r.o. University of Chemical Technology in Prague
Období realizace:	18. 4. 2017 - 28. 2. 2020
Stav:	Project completed
Akronym:	SAND TEAM
Celkové náklady:	16,936,660 CZK
Dotace:	10,980,037 CZK
Celkové náklady-VŠCHT:	1,828,264 CZK
Dotace-VŠCHT:	1,371,198 CZK
Řešitel za VŠCHT:	Antoš Petr, Dr. Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/16_084/0010119 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Research and development of a new generation of butter churns with higher performance and an efficient cooling system for use in warm climate areas.
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/15_019/0004604
Program/Výzva:	APPLICATION I. CALL - WITH EFFECTIVE COOPERATION
Anotace:	The project is focused on research and development of a new generation of high-performance butter churns. The butter churns will have an efficient cooling system and significantly improved butter production technology so that they meet the requirements for butter production in warm climate areas of the Middle East and South Asia. The project will result in a prototype and a utility model.
Partneři:	B e H o spol. s r. o. University of Chemical Technology in Prague
Období realizace:	1. 1. 2017 - 29. 9. 2019
Stav:	Project completed
Akronym:	BREAD MAKER
Celkové náklady:	29,900,000 CZK
Dotace:	16,909,250 CZK
Celkové náklady-VŠCHT:	3,520,000 CZK
Dotace-VŠCHT:	2,288,000 CZK
Řešitel za VŠCHT:	Filip Vladimír, prof. Ing., CSc.

PROJECT CZ.01.1.02/0.0/0.0/15_019/0004604 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

NewSurf: A new surface treatment method for non-enzymatic harvesting of cells intended for pharmacological or medical use
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/17_107/0012489
Program/Výzva:	APPLICATION IV. Call - with effective cooperation
Anotace:	The aim of the project is to develop new materials and methods for cell cultivation using modern materials whose surface properties can be changed non-chemically. This method will have a number of advantages over current procedures and will therefore find application in many applications, especially in pharmacy, medicine and research.
Partneři:	PrimeCell Advanced Therapy, a.s. University of Chemical Technology in Prague
Období realizace:	1. 1. 2019 - 28. 2. 2021
Stav:	Project completed
Akronym:	NewSurf
Celkové náklady:	16,155,334 CZK
Dotace:	11,085,790 CZK
Celkové náklady-VŠCHT:	7,916,736 CZK
Dotace-VŠCHT:	5,937,552 CZK
Řešitel za VŠCHT:	Štěpánek František, prof. Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/17_107/0012489 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development of a filling and sealing monoblock for filling corrosive substances
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Program Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/16_084/0009890
Program/Výzva:	APPLICATION III. Call - with effective cooperation
Anotace:	The project is focused on the development of a technically and qualitatively new filling and sealing monoblock for filling corrosive substances, using modern, commercially and financially available materials. The project results in 2 prototypes of monoblocks/machines for filling substances based on hypochlorites, acids and alkalis.
Partneři:	Fillmatech spol. s r.o. University of Chemical Technology in Prague
Období realizace:	3. 4. 2017 - 30. 3. 2020
Stav:	Project completed
Akronym:	Monoblock
Celkové náklady:	21,200,339 CZK
Dotace:	11,950,631 CZK
Celkové náklady-VŠCHT:	4,626,815 CZK
Dotace-VŠCHT:	3,468,611 CZK
Řešitel za VŠCHT:	Marelová Jana, Ing. Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/16_084/0009890 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

CZ.01.1.02/0.0/0.0/15_019/0004801
Poskytovatel:	Ministry of Industry and Trade of the Czech Republic
Poskytovatel, plný název:	Operational Programme Enterprise and Innovation for Competitiveness
Program, plný název:	OP PIK
Program:	Photocatalytically active wallpapers
Registrační číslo projektu:	APPLICATION I. CALL - WITH EFFECTIVE COOPERATION
Program/Výzva:	As part of the implementation of industrial research and development, Vavex 1990 s.r.o., in cooperation with the Institute of Computer Science and Technology, wants to create photocatalytically active wallpapers that will be able to clean the air in the interior, and possibly also have antibacterial effects. The development and research of photocatalytically active wallpapers will take place in a laboratory environment by testing new technologies and materials, followed by designing an application for industrial use. To test the discovered application, the existing stamping and bottling line will have to be modified.
Anotace:	Vavex 1990 s.r.o*University of Chemical Technology in Prague
Partneři:	1. 3. 2017 - 29. 9. 2020
Období realizace:	Project completed
Stav:	OPPIK, MPO
Akronym:	4 345 250 CZK
Celkové náklady:	2 275 975 CZK
Dotace:	2 151 500 CZK
Celkové náklady-VŠCHT:	1 398 475 CZK
Dotace-VŠCHT:	Krýsa Josef, prof. Dr. Ing.
Řešitel za VŠCHT:	PROJECT CZ.01.1.02/0.0/0.0/15_019/0004801 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

New formulations of old paint remover
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Enterprise and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/20_358/0023341
Program/Výzva:	Innovation vouchers - VI. Call
Anotace:	Development of a new formulation of old paint remover (OSN) for the hobby market with a reduced content of volatile organic compounds (VOC). The possibility of using alternative substances with a smaller negative impact on the environment and health while maintaining or increasing cleaning ability will be experimentally investigated.
Partneři:	University of Chemical Technology in Prague
Období realizace:	5. 10. 2020 - 31. 5. 2021
Stav:	Project completed

PROJECT CZ.01.1.02/0.0/0.0/20_358/0023341 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development of a catalyst for the decomposition of hydrogen peroxide in the gas phase
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/17_102/0011542
Program/Výzva:	III. Knowledge Transfer Partnership Call
Anotace:	The subject of the project is the use of the professional knowledge of a master's degree graduate in the development of a catalyst for the decomposition of the gas phase of H2O2. The project will develop a catalyst that will serve for the decomposition of the gas phase of H2O2 used for sterilization in the pharmaceutical and food industries. The result of the project will be a production process according to which the catalyst can be produced after the completion of the project.
Partneři:	Ranido, s.r.o. University of Chemical Technology in Prague
Období realizace:	2. 7. 2018 - 31. 12. 2020
Stav:	Project completed
Akronym:	PZT_II
Celkové náklady:	5,480,590 CZK
Dotace:	4,258,513 CZK
Celkové náklady-VŠCHT:	1,895,590 CZK
Dotace-VŠCHT:	1 326 913 CZK
Řešitel za VŠCHT:	Kikhtyanin Oleg, Ing., Ph.D.

PROJECT CZ.01.1.02/0.0/0.0/17_102/0011542 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Research and development of the highest performance butter churn
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/16_084/0010218
Program/Výzva:	APPLICATION III. Challenge - with effective cooperation
Anotace:	The project is focused on the research and development of butter churns of the highest performance range. The butter churns will reach an output of up to 6000 kg/hour and will have an effective cooling system and significantly improved butter production technology to meet the requirements for butter production for markets in the Middle East and South Asia. The project will result in a functional sample and a utility model. The subject of the project is the trade secret of B e H o spol. s r.o.
Partneři:	B e H o spol. s r. o. University of Chemical Technology in Prague
Období realizace:	1. 10. 2017 - 31. 8. 2020
Stav:	Project completed
Celkové náklady:	26,320,000 CZK
Dotace:	15,139,264 CZK
Celkové náklady-VŠCHT:	3,140,000 CZK
Dotace-VŠCHT:	2,355,000 CZK
Řešitel za VŠCHT:	Filip Vladimír, prof. Ing., CSc.

PROJECT CZ.01.1.02/0.0/0.0/16_084/0010218 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development and retrofitting of Technopark Kralupy, University of Chemical Technology, Prague
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/15_035/0007164
Program/Výzva:	Infrastructure services I. call - Non-public support - activity c)
Anotace:	Development and retrofitting of Technopark Kralupy, University of Chemical Technology, Prague. The development of TPK activities is the result of the development of TPK, which began its activities in June 2015. As a result of an offensive marketing campaign and professional competence, TPK has a very good position among business entities. It quickly became clear that TPK's potential is not only in laboratory rentals, but also in special services - measurement, testing and cooperation with entrepreneurs in solving specific problems. The project only solves the necessary equipment.
Partneři:	University of Chemical Technology in Prague
Období realizace:	4. 5. 2017 - 27. 4. 2018
Stav:	Project completed
Celkové náklady:	22,762,000 CZK
Dotace:	18,877,500 CZK
Celkové náklady-VŠCHT:	22,762,000 CZK
Dotace-VŠCHT:	18,877,500 CZK
Řešitel za VŠCHT:	Petrák Milan, Ing.

PROJECT CZ.01.1.02/0.0/0.0/15_035/0007164 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development and Retrofitting of Technopark Kralupy VŠCHT Prague III
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/17_112/0012674
Program/Výzva:	INFRASTRUCTURE SERVICES - IV. CALL - Non-public support - activity c)
Anotace:	Technopark fordefended its activities in June 2015. It was shown that the potential of TPK is not only in the rental of laboratories, but also in special services. The submitted project addresses the addition of instruments and equipment with regard to the experience from the operation of TPK. Place of implementation Kralupy nad Vltavou. Project focus: retrofitting with instrumentation for materials research. The instruments will be located in rooms with a total area of 408.2 m2.
Partneři:	University of Chemical Technology in Prague
Období realizace:	8. 11. 2018 - 29. 4. 2019
Stav:	Project completed
Celkové náklady:	9,280,000 CZK
Dotace:	6,960,000 CZK
Celkové náklady-VŠCHT:	9,280,000 CZK
Dotace-VŠCHT:	6,960,000 CZK
Řešitel za VŠCHT:	Petrák Milan, Ing.

PROJECT CZ.01.1.02/0.0/0.0/17_112/0012674 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

Development and retrofitting of Technopark Kralupy VŠCHT Prague IV
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Operational Programme Entrepreneurship and Innovation for Competitiveness
Program:	OP PIK
Registrační číslo projektu:	CZ.01.1.02/0.0/0.0/19_283/0018667
Program/Výzva:	INFRASTRUCTURE SERVICES - VI. CALL - Non-public support - activity c)
Anotace:	After two successful projects of retrofitting the Technopark, a final retrofitting project is prepared, focused primarily on a unique technique for studying the internal structure of materials. The submitted project addresses the addition of three instruments and equipment with regard to experience from the operation of the TPK. Place of implementation Technopark VŠCHT Kralupy nad Vltavou. Project focus: retrofitting with instrumentation for materials research. The instruments will be located in rooms with a total area of 232.5 m2.
Partneři:	University of Chemical Technology in Prague
Období realizace:	17. 6. 2020 - 27. 5. 2021
Stav:	Project completed
Celkové náklady:	22,160,000 CZK
Dotace:	16,620,000 CZK
Celkové náklady-VŠCHT:	22,160,000 CZK
Dotace-VŠCHT:	16,620,000 CZK
Řešitel za VŠCHT:	Petrák Milan, Ing.

PROJECT CZ.01.1.02/0.0/0.0/19_283/0018667 WAS CO-FINANCED BY THE EUROPEAN UNION FROM THE REGIONAL DEVELOPMENT FUND WITHIN THE OPERATIONAL PROGRAMME ENTREPRENEURSHIP AND INNOVATION FOR COMPETITIVENESS UNDER THE AUSPICES OF THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC.

↑ seznam projektů

CZ.02.2.69/0.0/0.0/16_014/0000657
Poskytovatel:	Ministry of Education, Youth and Sports
Poskytovatel, plný název:	Operational Programme Research, Development and Education
Program, plný název:	OP R&D
Program:	Creation of a system for effective communication with the application sphere
Registrační číslo projektu:	Call No. 02_16_014 for Building expert capacities - technology transfer in priority axis 2 of the OP
Program/Výzva:	The aim of the project is to build an effective and sustainable internal and external infrastructure for effective communication with the application sphere and transfer of know-how. The internal infrastructure will include the creation and implementation of an effective motivation system. The built infrastructure will provide support in the area of intellectual property protection, preparation and administration of grant and commercial projects. The system will focus on effective management of intellectual property and finding opportunities for its application in practice.
Anotace:	University of Chemical Technology in Prague
Partneři:	1. 12. 2016 - 30. 11. 2019
Období realizace:	Project completed
Stav:	OPVVV, MEYS
Akronym:	17,500,000 CZK
Celkové náklady:	17,500,000 CZK
Dotace:	17,500,000 CZK
Celkové náklady-VŠCHT:	Petrák Milan, Ing.

↑ seznam projektů

Development of a device for measuring atmospheric corrosivity
Poskytovatel:	TAČR
Poskytovatel, plný název:	Technology Agency of the Czech Republic
Program, plný název:	TREND Industrial Research and Experimental Development Program
Program:	TREND
Registrační číslo projektu:	FW01010482
Program/Výzva:	TREND 1
Anotace:	The aim of the project is to develop a miniature automated device for measuring the current atmospheric corrosivity for use in the automotive industry, the pulp and paper industry and in construction, for monitoring conditions during transport, for controlling air quality in the interior of cultural monuments, for research purposes and other applications. The device will work on the principle of measuring small changes in electrical resistance in a thin metal layer. The current corrosion rate of a suitably selected metal or metals determined from changes in resistance will provide information about the corrosivity of the environment. The data will be transmitted wirelessly to a server, which will process it in real time and inform the user about the current situation via selected channels. The user can thus react immediately if the corrosivity increases above the selected critical limit.
Partneři:	GEMA, a.s. University of Chemical Technology in Prague
Období realizace:	1. 1. 2020 - 31. 12. 2023
Stav:	Project completed
Celkové náklady:	29,783,000 CZK
Dotace:	20,801,000 CZK
Celkové náklady-VŠCHT:	13,273,000 CZK
Dotace-VŠCHT:	11,946,000 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.
Zakázka:	570-23-0192

Project FW01010482 was financed with state support from the Technology Agency of the Czech Republic and the Ministry of Industry and Trade within the TREND Program

↑ seznam projektů

R&D of the use of recycled materials in the production of porous polymer molds
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Program of Applied Research and Experimental Development TRIO
Program:	TRIO
Registrační číslo projektu:	FV40392
Program/Výzva:	FV - TRIO (2016 - 2022)
Anotace:	Within the project, we want to develop a formula for a porous polymer material usable in the production of molds for pressure casting of sanitary ceramics, which will be produced using recycled waste from mold production or using materials obtained from discarded molds with an end-of-life from the production of sanitary ceramics. The specific objective of the project is: 1. to develop a formula for a new material for the production of molds using recyclate from past mold production, which will be protected by a utility model 2. to produce functional samples of realh molds made of material with recycled material and test them 3. verify the technology of manufacturing porous molds for pressure casting of sanitary ceramics with recycled material We want to develop recipes and apply production procedures so that at least 10% of recycled material can be incorporated into the new mold without affecting the properties of the material and the possibility of controlling its structure, mainly the size of the pores.
Partneři:	Dřevojas, production cooperative VÚTS, a.s. University of Chemical Technology in Prague
Období realizace:	1. 4. 2019 - 31. 12. 2021
Stav:	Project completed
Celkové náklady:	23,281,000 CZK
Dotace:	15,486,000 CZK
Celkové náklady-VŠCHT:	5,974,000 CZK
Dotace-VŠCHT:	Pokorný Jiří, Dr. Ing.
Řešitel za VŠCHT:	Project FV40392 was financed with state support from the Ministry of Industry and Trade of the Czech Republic within the TRIO Program

↑ seznam projektů

Development of a special polymer material with controlled physical and mechanical properties
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	Program of Applied Research and Experimental Development “TRIO”
Program:	TRIO
Registrační číslo projektu:	FV20501
Program/Výzva:	FV - TRIO (2016 - 2022)
Anotace:	The aim of the project is to obtain new knowledge necessary for the development of a new material from which molds for pressure casting of ceramics in various porosities can be produced, suitable for use with ceramic material with a high proportion of fine particles. The specific aim of the project is the development of a special polymer material with controlled physical and mechanical properties intended for the production of molds for pressure casting of ceramics. We want to produce several functional mold samples in various porosities. The aim is to achieve at least 15 thousand cycles on the molds (when using ceramic material with a high content of fine particles) and to achieve a mold price that is at least 30% lower than the current solution (primarily Gil-Resin S). The main outputs of the project will be: Utility model for the composition of polymer material Functional samples of molds made of special polymer material with controlled physical and mechanical properties Proven technology for the production of molds from special polymer material with controlled physical and mechanical properties The potential for applying the project results is significant. The main advantage of the new solution is the possibility of expanding the technology of pressure casting to eastern countries (especially Asia), where it was previously unavailable. The improvement of the technical and utility properties of the molds while reducing the price compared to current global solutions is also essential. The application of the project results in practice is also guaranteed by the already agreed sales and fits exactly into the strategic orientation of the company.
Partneři:	Dřevojas, výrobní družstvo VÚTS, a.s. Vysoká škola chemicko-technologická v Praze
Období realizace:	1. 2. 2017 - 31. 12. 2018
Stav:	Project completed
Celkové náklady:	14,749,000 CZK
Dotace:	11,691,000 CZK
Celkové náklady-VŠCHT:	4,318,000 CZK
Dotace-VŠCHT:	4,318,000 CZK
Řešitel za VŠCHT:	Pokorný Jiří, Dr. Ing.

The FV20501 project was financed with state support from the Ministry of Industry and Trade of the Czech Republic within the TRIO Program

↑ seznam projektů

Development of environmentally friendly hydrogenation catalysts
Poskytovatel:	MPO
Poskytovatel, plný název:	Ministry of Industry and Trade of the Czech Republic
Program, plný název:	TRIO
Program:	TRIO
Registrační číslo projektu:	FV40158
Program/Výzva:	FV - TRIO (2016 - 2022)
Anotace:	The aim of the project Development of environmentally friendly hydrogenation catalysts is to create a new catalyst that no longer contains chromium. This new catalyst will offer the same stability, activity and lifetime as the currently used catalyst based on copper and chromium.
Partneři:	Ranido, s.r.o. University of Chemical Technology in Prague
Období realizace:	1. 7. 2019 - 31. 6. 2022
Stav:	Project completed
Celkové náklady:	12,509,000 CZK
Dotace:	8,427,000 CZK
Celkové náklady-VŠCHT:	3,735,000 CZK
Dotace-VŠCHT:	3,200,000 CZK
Řešitel za VŠCHT:	Kubička David, prof. Ing., Ph.D., MBA

Project FV40158 was financed with state support from the Ministry of Industry and Trade of the Czech Republic within the TRIO Program

↑ seznam projektů

Development of sensors for monitoring corrosion under insulation
Poskytovatel:	S-IC
Poskytovatel, plný název:	Central Bohemian Innovation Center, Association
Program, plný název:	Transfer vouchers
Program:	Transfer vouchers
Registrační číslo projektu:	SML_021-2024-SIC
Anotace:	The aim of the project is to develop sensors for quantifying the corrosivity of the environment under pipeline insulation and thus reduce the risk of developing corrosion attack on pipelines, which can lead to industrial accidents with significant financial, health and environmental damage. The use of corrosivity sensors will enable constant monitoring and the introduction of a warning system for operators. The latter will be notified in a timely manner that there has been an increase in corrosivity and there is a risk of pipe corrosion and leakage of operating fluid.
Partneři:	University of Chemical Technology in Prague
Období realizace:	1.5.2024-30.9.2024
Stav:	Implementation
Celkové náklady:	625,000 CZK
Dotace:	500,000 CZK
Celkové náklady-VŠCHT:	625,000 CZK
Dotace-VŠCHT:	500,000 CZK
Řešitel za VŠCHT:	Prošek Tomáš, doc. Ing., Ph.D.

: 22.5.2025 22:55, : Jan Prošek

Our projects

EC / HORIZONT 2020

EC / RFSC

EK / RFSC

GAČR / GAČR

MIT / OP TAK

MPO / OP PIK

MPO / OP TAK

MPO / TRIO

Ministry of Education, Youth and Sports / Creation of a system for effective communication with the application sphere

Ministry of Industry and Trade of the Czech Republic / Photocatalytically active wallpapers

Ministry of Industry and Trade of the Czech Republic / Use of heat-resistant materials for advanced applications in transport vehicles

MŠMT / MŠMT

S-IC / Transfer vouchers

TAČR / EPSILON

TAČR / THÉTA

TAČR / TREND

REBAT - development of a pilot plant for the extraction of metals of interest during the recycling of Li batteries and accumulators

The influence of coagulation conditions on suspension formation and membrane separation efficiency

Global Jet

Smart thermostatic system with photocatalytic air purification for low-energy buildings

Use of composites with polymer matrix to extend the service life of containers for animal by-products (VŽP)

Development of inorganic hardeners for foundry self-hardening mixtures with inorganic binder

Influence of catalyst properties on hydrogenation conversions of oxygenates obtained from sugars

Study of key factors influencing hydrogenation/deoxygenation of mixtures of oxygenates

The influence of precipitates on hydrogen transport and hydrogen-induced embrittlement of aluminum alloys

Antibacterial Barrier in Human Joint Replacements

Development of technology for replacing fossil methane by biological conversion of carbon dioxide to methane using renewable energy sources

Research, development and verification of a new technology for the production of anti-corrosion coatings from secondary raw materials

GRENA, a.s. - Application 1 - Chemically bonded, hydrophobic vermiculite board

Development of technology for optimizing the surface condition of special high-alloy materials

Comprehensive solution for extending the service life of molds for high-pressure casting of sanitary ceramics

Hydrogen embrittlement resistant new steel links solutions for off-shore wind turbines

Modelling of hydrogen activity from atmospheric corrosion in ultra-high strength steels for light structure application

Determination of the Limit Concentration of Hydrogen in a Mixture with Natural Gas for the Safe Use of Underground Gas Storage Technologies

Highly advanced catalyst for the transformation of methanol into hydrocarbons for reliable production of e-gasoline

Research and development of butter processing equipment REWORKER

Development of a method for producing a primary mold for the production of molds for pressure casting of ceramics

Quantification of basicity of reconstructed double layer hydroxides and its relationship with catalytic behavior in base-catalyzed reactions

Supported copper-based hydrogenolysis catalysts

Simultaneous deoxygenation of acids and phenols in pyrolysis oils from activated sludge

Study and optimization of promoted CuZnAl hydrogenation catalysts

The influence of microstructure on hydrogen-induced corrosion damage of high-strength steels

Reliable Bio-based Refinery Intermediates

Joint research and development of innovative catalytic processing and technology for the efficient conversion of vegetable oils into clean fuels

Development of a new generation of RECLIME recycling unit for recycling calcium compounds (Ca++) used in the purification (cleaning) of raw sugar juices from sugar beet and sugar cane

Research and development of new boards and 3D mouldings using expanded vermiculite

Application of recycled zinc in anti-corrosion coating systems

Comprehensive development of a biological agent for brewing

3D SANDPRINT - New inorganic binder for additive technologies for the production of foundry cores

Filled porous inorganic coatings for special purposes

Development and Retrofitting of Technopark Kralupy VŠCHT Prague V

Research and development of a new line of green cosmetics

HERMIA - Development of modern technology for processing gastro-waste and BRO using Hermetia illucens fly larvae

Floor-ceiling modules for air purification with photocatalytic and antimicrobial function

Use of thermoplastics to extend the service life of metal containers for industry

CZ.01.1.02/0.0/0.0/15_019/0004629

Application of nanofibers in food packaging

Research on a new technology of foundry moulds made of self-hardening mixtures will useusing a geopolymer binder system

Research and development of a new generation of butter churns with higher performance and an efficient cooling system for use in warm climate areas.

NewSurf: A new surface treatment method for non-enzymatic harvesting of cells intended for pharmacological or medical use

Development of a filling and sealing monoblock for filling corrosive substances

CZ.01.1.02/0.0/0.0/15_019/0004801

New formulations of old paint remover

Development of a catalyst for the decomposition of hydrogen peroxide in the gas phase

Research and development of the highest performance butter churn

Development and retrofitting of Technopark Kralupy, University of Chemical Technology, Prague

Development and Retrofitting of Technopark Kralupy VŠCHT Prague III

Development and retrofitting of Technopark Kralupy VŠCHT Prague IV

CZ.02.2.69/0.0/0.0/16_014/0000657

Development of a device for measuring atmospheric corrosivity

R&D of the use of recycled materials in the production of porous polymer molds

Development of a special polymer material with controlled physical and mechanical properties

Development of environmentally friendly hydrogenation catalysts

Development of sensors for monitoring corrosion under insulation